How Do You Harden Argentium Silver?

Does argentium scratch silver?

Like traditional Sterling Silver, it can be work hardened.

Additionally it can be hardened by a simple, low temperature heat treatment.

This process improves the hardness of Argentium Silver considerably, giving it excellent durability and greater scratch resistance..

How do you harden earring posts?

Soldering an earring post will always soften the wire a bit. Easiest way to harden it is to grip it with pliers and twist it a couple half turns. This work hardens the wire and also tests your soldered joint.

How do you harden earring wires?

Work harden the earwires with a rawhide mallet and steel block, by gently hammering around the shape; avoid the loop at the end as you don’t want to flatten it. If you don’t have a hammer and steel block, use a burnisher and any hard metal surface.

Should I use half hard or dead soft wire?

Dead soft is typically used for wire weaving and wire wrapping, including wrapped cabochons and “sculpted” wire jewelry. Half hard is good for making components that need to hold their shape (ear wires, clasps, jump rings, necklace foundations, bracelet forms, etc.).

What does dead soft sterling silver mean?

Dead soft, which refers to the hardness of wire, is usually used to describe sterling silver or gold filled wire. Dead-soft wire has not been hardened at all, making it the most malleable. It is most often used when a design calls for making several bends and loops.

How do you harden silver?

Sterling Silver can be hardened by heating to 600°F (316°C). Hold for 30-50 minutes then let it air cool to room temperature. Work: Fine and Sterling Silver will work-harden when rolled, drawn, or forged.

How do you harden a dead soft silver wire?

Bang the wire shape with a rawhide mallet (or rubber mallet) on top of a rubber bench block, or a metal jewelry hammer on top of a steel bench block. (This bench block has one side rubber and one side steel). For rings, use the rawhide/rubber mallet or the jewelry hammer while the ring is on a steel ring mandrel.

Does quenching Harden silver?

Many silver alloys can be heat hardened. Process to heat harden, anneal for 30 minutes at 1200°F (760°C) for assembled pieces and 1370°F (743°C) for non-assembled pieces followed by rapid water quenching. To harden, heat to 650°F (343°C) for 30 minutes, quench or air cool.

Do you quench silver after annealing?

Steps to Annealing Be careful not to heat metals beyond the annealing temperature or they will melt. A good guide, to prevent this from happening, is to use a permanent marker on the metal sheet. The mark will burn off near the annealing temperature of copper and silver, then you know to stop heating and quench it.

Is Argentium silver more expensive?

As you would expect, Argentium is more expensive than standard sterling silver and because the benefits are largely technical rather than visual, it takes a deeper level of understanding from buying customers to fully appreciate the product (to all intents and purposes, a display of Argentium jewellery will look very …

Is argentium harder than sterling silver?

Argentium Silver is stronger and more durable than traditional sterling, making it more resistant to these types of damages. Ideally, you want a metal that is soft and malleable to work with when forming a piece of jewelry, but also hardens in its finished state.

Why does hammering wire harden it?

Hammering wire or sheet against a smooth, solid, surface is necessary in order to “harden” the material so that it will retain its’ finished shape. The Wire Wacker’s nylon surfaces are hard enough to work like steel, but soft enough not to mar the metal or wire.

What is argentium silver worth?

Why Is Argentium Worth More than Sterling Silver? Argentium is worth more per weight unit because it contains germanium, not copper. Germanium is currently trading at a price of about $1,800 per kilogram, which translates to $1.80 per gram. In contrast, copper is currently selling for only about $0.0046 per gram.

How do you clean argentium silver?

To maintain the shine and luster of Argentium silver simply wipe away any dust or finger marks with a soft cloth. Wash more intricate pieces in warm soapy water; rinse and dry immediately with a soft cloth to avoid water marks.